features surge overload -240~500 amperes peak low forward voltage drop mounting position: any electrically isolated base -2000 volts materials used carries u/l recognition maximum ratings and electrical characteristics mbr-w mbr-w mbr-w mbr-w mbr-w mbr-w mbr-w 10005 1001 1002 1004 1006 1008 1010 15005 1501 1502 1504 1506 1508 1510 25005 2501 2502 2504 2506 2508 2510 35005 3501 3502 3504 3506 3508 3510 50005 5001 5002 5004 5006 5008 5010 maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms bridge input voltage v rms 35 70 140 280 420 560 700 v maximum average forward rectified output current at @tc=55 peak forward surge current 8.3ms single half sine-wave super imposed on rated load maximum forward voltage drop per element at 5.0/7.5/12.5/17./25.0 peak maximum reverse current at rated dc blocking voltage per element @t j =25 operating temperature range t j storage temperature range t stg rev. 7, 16-mar-2017 unit silicon bridge rectifiers for capacitive load current by 20% resistive or inductive load 60h z . rating at 25 ambient temperature unless otherwise specified. reverse voltage - 50 to 1000 volts forward current - 10/15/25/35/50 amperes dimensions in inches and (milimeters) i (av) symbol -55 to +150 -55 to +150 i fsm 10.0 a characteristics mbr10/15/25/35/50a w series a i r v f a v 1.1 mbrw mbr 10w 10 15 25 35 50 240 300 400 400 500 mbr 15w mbr 25w mbr 35w mbr 50w .469(11.9) .429(10.9) .693(17.6) .732(18.6) .693(17.6) .732(18.6) 1.114(28.3) 1.133(28.8) .038(0.97) .042(1.07) (30.5)min 1.200 hole for no.8 screw 193"(4.9)diam .335(8.5) .295(7.5) metal heat sink 1.133(28.8) 1.114(28.3)
rating and characteristic curves mbr10/15/25/35/50a w series the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 7, 16-mar-2017 fig.3 ? typical forward characteristics instantaneous forward current (amperes) instantaneous forward voltage ,volts 0.4 0.1 1.0 0.01 10 100 0.6 0.8 1.0 1.2 1.4 1.6 mbr25w mbr15w mbr35/50w mbr10w temperature (c) fig. 2 ? derating curve output rectified current average forward output current (amperes) mbr10w mbr15w mbr25w mbr35w mbr50w 40 20 10 0 30 50 50 100 150 fig.4 ? typical reverse characteristics percent of rated peak reverse voltage instantaneous reverse current, (microamperes) t j = 25c 0 0.01 0.1 1.0 10 20 40 60 80 100 120 140 fig.1-maximum forward surge current number of cyclets at 60hz peak forward surge current amperes 1 10 100 0 400 200 100 300 600 500 mbr50w mbr25/35w mbr15w mbr10w
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
